I just got XPlane running on my MacBook Pro and have a Logitech headset. It picks up nothing. And when I push the button that i designated for Contact ATC...nothing happens. Any ideas?
Also, how do I get the X-Plane ATC running commentary to STOP?
headset dead, and can't contact ATC
-
- Posts: 9
- Joined: Thu Dec 16, 2010 12:17 pm
- Location: Escondido (San Diego), California
- Contact:
headset dead, and can't contact ATC
Bob Carpenter
Instrument Rated Private Pilot
Instrument Rated Private Pilot
-
- Posts: 717
- Joined: Wed Oct 06, 2010 3:54 pm
Re: headset dead, and can't contact ATC
Did you tune to the correct ATC frequency in your COM1 radio before keying the mic, flybob? The pilotedge servers simulate the real-world frequencies, so the frequency to reach a controller will be different depending on your location. I've been on LA center this morning and monitored your flight on the map page. I never saw you tuned to a specific frequency, so that might be the reason you couldn't hear/talk to ATC. Also, check to make sure you're using the COM1 radio, since COM2 isn't functional on pilotedge yet.
-
- Posts: 54
- Joined: Sun Feb 06, 2011 11:26 pm
- Location: Seattle, WA
- Contact:
Re: headset dead, and can't contact ATC
Just chiming in: I'm glad you mentioned that, as I wasn't aware of this limitation and had tried using both radios like I do in real life. (Keith S. must have been responding out of courtesy and/or pity after hearing me call ground on the approach frequency.)Eugene Zaporozhets wrote:Also, check to make sure you're using the COM1 radio, since COM2 isn't functional on pilotedge yet.
Flybob, I too am a Mac user. Regarding your first question, check the headset is working at the operating-system level first. Go to Sys Preferences > Sound > Input, set your 'input volume' to about mid-way, and verify that sounds register on the "input level" meter. If they're not working there, that's your problem. I wager that your input volume slider is set to its lowest setting.
Re: your second question... assuming you mean the built-in radio chatter that X-Plane provides, you can turn that off in X-Plane: uncheck Settings > Sound > background radio chatter.
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: headset dead, and can't contact ATC
Summary of suggestions so far:
- make sure mic is working at the OS-level, and is the default recording device.
- use COM1 to talk to PilotEdge controllers
Additional suggestion:
- make sure you have Master On and Avionics on, and that you're tuned to the correct frequency for your location (ie, if you're at SNA, then call SNA_GND for a radio check). Also, bear in mind that if your bus voltage drops below 90% of the nominal voltage (ie, 90% of 12v or 24v), the radio will not work, so get that engine going to fire up the alternator/generator.
If you still have problems, let us know, we'll get you up and going! Thanks for posting on the forum, too, it's helpful for these questions to be here, rather than email. That way, others can see the problem and the solution.
- make sure mic is working at the OS-level, and is the default recording device.
- use COM1 to talk to PilotEdge controllers
Additional suggestion:
- make sure you have Master On and Avionics on, and that you're tuned to the correct frequency for your location (ie, if you're at SNA, then call SNA_GND for a radio check). Also, bear in mind that if your bus voltage drops below 90% of the nominal voltage (ie, 90% of 12v or 24v), the radio will not work, so get that engine going to fire up the alternator/generator.
If you still have problems, let us know, we'll get you up and going! Thanks for posting on the forum, too, it's helpful for these questions to be here, rather than email. That way, others can see the problem and the solution.
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: headset dead, and can't contact ATC
Update: I worked with Bob on this, it was due to an older version of Xplane (pre 9.41). He's working on updating it now.
-
- Posts: 9
- Joined: Thu Dec 16, 2010 12:17 pm
- Location: Escondido (San Diego), California
- Contact:
Re: headset dead, and can't contact ATC
Thanks Keith! I can't believe how much time you spent with me to get this working....I'm Lovin' It!
I flew two patterns around my old home drome and got a headache from the nerves....talk about realistic!
I flew two patterns around my old home drome and got a headache from the nerves....talk about realistic!
Bob Carpenter
Instrument Rated Private Pilot
Instrument Rated Private Pilot