Flight1 GTN 750 squawk codes working in PE?

Post Reply
Thomas_Horn
Posts: 77
Joined: Fri Jan 02, 2015 3:18 am

Flight1 GTN 750 squawk codes working in PE?

Post by Thomas_Horn »

I am wondering if the GTN 750 from flight1 works on PE...I have read somewhere that the Squawk code entered on the unit is not submitted to the PE client.
However, I have seen videos on Youtube which use the GTN750 on PE.

Thanks for clarifying..

Cheers, Thomas
X-Plane 11.32, Windows 10, 4.8 GHz 7700K, 16 GB RAM. 4K 55'' Screen resolution with Nvidia GTX 1070. ELITE and PFC flight controls
Flying Penguin
Posts: 47
Joined: Fri Jul 24, 2015 3:32 am

Re: Flight1 GTN 750 squawk codes working in PE?

Post by Flying Penguin »

I've never had a problem with the code being read. I do always set Mode C in the client though as the on/alt switch is no more reliable than it is with the regular transponders.
Thomas_Horn
Posts: 77
Joined: Fri Jan 02, 2015 3:18 am

Re: Flight1 GTN 750 squawk codes working in PE?

Post by Thomas_Horn »

Thanks Jamie..

If you have a registered version of FSUIPC installed, you can also use the built-in function (Xpdr-mode C, or something like that...) and assign a button or keystroke. Works fine in PE, same goes for the IDENT button which is also implemented in FSUIPC.
X-Plane 11.32, Windows 10, 4.8 GHz 7700K, 16 GB RAM. 4K 55'' Screen resolution with Nvidia GTX 1070. ELITE and PFC flight controls
Post Reply