Page 1 of 1

New Member - !st Flight

Posted: Tue Aug 30, 2016 10:56 am
by rightseat
I am a new member and received the audio for ATC. However, when I pushed my PTT, I had no modulation. Any suggestions to correct this problem - Thanks

Re: New Member - !st Flight

Posted: Tue Aug 30, 2016 12:05 pm
by Kyle.Sanders
Sim?
OS?
What is your computer default audio settings?
What is your PTT set to in the sim/PilotEdge client?

Re: New Member - !st Flight

Posted: Tue Aug 30, 2016 2:01 pm
by rightseat
Kyle,

Thanks for the response. I'm using FSX Gold Edition. What should the computer default setting should be so I can transmit? The PTT is set to one of the top buttons on the CH Yoke. How should it be set in the PilotEdge client?

Thanks a million and I look forward to your response so I can get up and flying!!!!

Rightseat

Re: New Member - !st Flight

Posted: Tue Aug 30, 2016 2:10 pm
by Keith Smith
Welcome to Pilotedge. I've moved your topic to the FSX client forum. Please use the most specific forum available when creating a forum. This avoids us having a ton of FSX support messages in the General forum.

There are two approaches for joystick-based PTT with PE and FSX:
1) Map the CH Yoke button to a keystroke using a 3rd party tool, then map the keystroke to the PE PTT in the PilotEdge applicaton, or

2) use the registered version of FSUIPC to trigger the PE PTT directly

Since you're just getting started, I'd recommend simply trying the service and use the keyboard to trigger the PTT for now. If your sim is running as Administrator, you'll need to run the pilot client as Administrator, too.

Re: New Member - !st Flight

Posted: Tue Aug 30, 2016 2:25 pm
by rightseat
Keith,

I'll give it a try and thanks again for your fine assistance. Of course, it's always one more challenge to get it working.

Thanks,

Rightseat