Hey Keith I bought the GTN 750 this weekend and I'm having a hard time with TCAS on the PE network with XP11. You mention the "other aircraft" setting but the only option I can find is to enable AI traffic and then select the aircraft I want to see. Do you know of a way to get this to work with XP11? Thanks for any help you can offer. I've been back on PE for a couple of weeks now and I'm learning a ton.Keith Smith wrote:The RXP GTN-750 also shows traffic from PE, see the picture here: https://twitter.com/pilotedgeATC/status ... 8018100224. Just make sure your 'other aircraft' is set to a number 1 greater than the number of targets you want to see on your TCAS.
GTN750/650 (and more) for XP10!!
-
SladeEvans
- Posts: 5
- Joined: Sun Sep 18, 2016 12:55 pm
Re: GTN750/650 (and more) for XP10!!
-
Keith Smith
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: GTN750/650 (and more) for XP10!!
Yes, set the AI aircraft count to the number of planes you want to be able to see on the tcas.
-
Marcus Becker
- Posts: 982
- Joined: Fri Feb 08, 2013 5:12 pm
Re: GTN750/650 (and more) for XP10!!
I can't seem to find this setting in XP11. I can find it in 10 with no problems.Keith Smith wrote:Yes, set the AI aircraft count to the number of planes you want to be able to see on the tcas.
-
Marcus Becker
- Posts: 982
- Joined: Fri Feb 08, 2013 5:12 pm
Re: GTN750/650 (and more) for XP10!!
Never mind. I found it. It's on the flight configuration page up on the top right hand corner.