New Sim Cockpit (almost) completed

Post Reply
webstalle
Posts: 48
Joined: Tue Sep 30, 2014 10:41 am
Location: Gross Gerau, Germany
Contact:

New Sim Cockpit (almost) completed

Post by webstalle »

I was off since mid of October until this week when I conducted a couple of flights to continue with my WUS challenge.
The reason I was off was the reconstruction of my Home Cockpit. Inspired by what OnTheGlideSlope assembled, I decided to rebuild my own cockpit. The old one used three 32'' monitors joined together at an 45° angle and a pre-assembled Cockpit panel made by XTOP (no longer in production I think).
I decided to use wider monitors and went for the 43'' ACERs, setup at an angle of 90°, so they shape a U with me sitting in between. Each one is driven by a dedicated PC with 1080Ti and i7-6700k, watercooled. The PCs are at the top of the Cockpit.
Since I'm not a carpenter or any other kind of a craftsmen, it took me quite a time to assemble the wooden frame. Both yoke and rudder are from the Brunner, a swiss company. Those devices are capable of force loading, so I can feel the forces of the airstream affecting the elevator, aileron and rudder at the controls.

Attached are some pictures taken with my mobile phone:
FlusiCockpit-1.jpg
FlusiCockpit-1.jpg (88.28 KiB) Viewed 2126 times
FlusiCockpit-2.jpg
FlusiCockpit-2.jpg (68.13 KiB) Viewed 2126 times
Last edited by webstalle on Sat Feb 24, 2018 1:05 pm, edited 1 time in total.
XP 1153, Win 10 64bit
FAA PPL
I-11, CAT-11,
A2Z ZLA #35, WUS #13, AZ #5
4x( i9-9900k), 4 x nVidia 2080 Ti/1080 Ti, 32GB DDR4) CLS-E-Yoke/Rudder, VTF G1000
http://www.twitch.tv/webstalle
XP Settings: Effects: Max, Text: max, 4xSSAA, Obj: High, Ref: High
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: New Sim Cockpit (almost) completed

Post by Keith Smith »

Excellent shots. For those that want to see the full images, right click and select "open image in new tab."
AZJim320
Posts: 23
Joined: Mon Jan 29, 2018 1:33 pm

Re: New Sim Cockpit (almost) completed

Post by AZJim320 »

All you need is a more comfortable chair. :)
Post Reply