[Apr 30] Instrument apps part 3: rapid fire

announcements, discussions and recordings of PilotEdge real-time workshops
Post Reply
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

[Apr 30] Instrument apps part 3: rapid fire

Post by Keith Smith »

I'm looking forward to this one...we're going to review a truckload of approach plates, back to back, using approaches suggested by the participants in the workshop.

The goal is to become comfortable with looking at an approach plate, extracting the necessary data being prepared to fly it with a high degree of confidence in a relatively short period of time.

The best way to do that, I believe, is to practice reviewing a lot of different approach plates to get a feel for the varied ways in which they can be built.
gavink42
Posts: 171
Joined: Mon Apr 16, 2012 7:08 pm
Location: KMEM

Re: [Apr 30] Instrument apps part 3: rapid fire

Post by gavink42 »

Looking forward to it too!
- PP ASEL, instrument, complex, high performance
- Member AOPA, EAA, IMC Club, Piper Owner Society
- Cherokee 180C owner
gavink42
Posts: 171
Joined: Mon Apr 16, 2012 7:08 pm
Location: KMEM

Re: [Apr 30] Instrument apps part 3: rapid fire

Post by gavink42 »

Here's couple of gotchas on a localizer approach...

http://skyvector.com/files/tpp/1304/pdf/05883LD36.PDF

My home field (KOLV) LOC/DME 36. Notice that VOSFY is the IAF, and that it's 17 DME from HLI.

Problem is, that even though HLI is shown on the plate, the radial that VOSFY is located on isn't.

You have to look at the Low Alt chart to find that VOSFY is located on the 222 radial!

And, just in case you need another reason to stay above the straight-in minimums (760')...

Notice that 697' tower just a hair right of course, and just off the runway threshold!
- PP ASEL, instrument, complex, high performance
- Member AOPA, EAA, IMC Club, Piper Owner Society
- Cherokee 180C owner
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: [Apr 30] Instrument apps part 3: rapid fire

Post by Keith Smith »

The video is up:
http://www.pilotedge.net/workshops/inst ... hes-part-3

Thanks to Mark Hargrove for recording and editing this, and to Christian for backing us up as usual.
Post Reply