PTT causing PE to crash

rickm101
Posts: 1
Joined: Fri Jun 20, 2014 8:02 pm

Re: PTT causing PE to crash

Post by rickm101 »

UPDATE: I got this working by deselecting the option in FSUIPC "Control to repeat while held". Repeating the control was the likely culprit as it now works without issue.

The same thing is happening to me. The PE client shows a successful connection, then:

[ERROR] Protocol error:
Disconnected from server
[ERROR] Protocol error:

Then a "Status" message dialog box that says:

"An error occurred connecting to the Air Traffic Control server".

I've been using the previous client for a little over a month without issue. I also upgraded to the latest FSUIPC (4.934) to see if that might solve the problem. It hasn't.
Marcus Becker
Posts: 982
Joined: Fri Feb 08, 2013 5:12 pm

Re: PTT causing PE to crash

Post by Marcus Becker »

rickm101 wrote:UPDATE: I got this working by deselecting the option in FSUIPC "Control to repeat while held". Repeating the control was the likely culprit as it now works without issue.
Great news! Thanks for sharing your solution.
Image
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: PTT causing PE to crash

Post by Keith Smith »

This looks like the same issue being reported here: viewtopic.php?f=14&t=4152

I was about to post the same suggestion here that I suggested in the other thread, which was to make sure it's not sending the command repeatedly. It's triggering the 'connect/disconnect' shortcut.
twharrell
Posts: 297
Joined: Mon Jul 08, 2013 12:02 pm

Re: PTT causing PE to crash

Post by twharrell »

Beautiful! I was just about to try that today. Good to know that works.

Todd
Regards,

Todd
twharrell
Posts: 297
Joined: Mon Jul 08, 2013 12:02 pm

Re: PTT causing PE to crash

Post by twharrell »

I can confirm that it works!

Todd
Regards,

Todd
Post Reply