PTT and FSUIPC

Post Reply
Turner
Posts: 134
Joined: Fri May 06, 2016 7:18 pm

PTT and FSUIPC

Post by Turner »

Hi,

I have PTT set up in FSUIPC to work with "Keypad -" and linked to the trigger on a joystick.

"Keypad -" works fine for PTT in P3D; however, the trigger doesn't work.

Never used FSUIPC before - but I think I have it set up right.

Any thoughts?

thanks,
Andrew
aventura
Posts: 24
Joined: Mon May 02, 2016 7:56 am

Re: PTT and FSUIPC

Post by aventura »

That didn't work for me. But mapping the joystick button to 'PTT transmit ON (SB3, RW, AVC) did the trick. I also had to map 'PTT Tansmit OFF (SB3, RW, AVC) to the control sent when the button is released.

Hope this helps.
A
Turner
Posts: 134
Joined: Fri May 06, 2016 7:18 pm

Re: PTT and FSUIPC

Post by Turner »

Hi aventura,

Thanks for the help!

That said... what's "(SB3, RW, AVC)" ? :) Tried digging around in the program and FSUIPC manual(s) but didn't find those references...

[Making some progress - I see it's at least Squawkbox 3 and Advanced Voice Client... ]

cheers
Andrew
Donovan
Posts: 90
Joined: Wed Apr 24, 2013 12:08 pm
Location: KCMA

Re: PTT and FSUIPC

Post by Donovan »

SB3 = SquawkBox ver 3
RW = Roger Wilco
AVC = Advanced Voice Client

All are communications addons for network flying such as VATSIM, IVAO, et al.

Don
Turner
Posts: 134
Joined: Fri May 06, 2016 7:18 pm

Re: PTT and FSUIPC

Post by Turner »

Thanks Don-

Ok, how did you map "the joystick button to 'PTT transmit ON' " ?

I can't find that!

Thanks again!
Mathurpc
Posts: 4
Joined: Fri Aug 19, 2016 7:47 pm

Re: PTT and FSUIPC

Post by Mathurpc »

Can somebody please clearly explain the procedure.
Donovan
Posts: 90
Joined: Wed Apr 24, 2013 12:08 pm
Location: KCMA

Re: PTT and FSUIPC

Post by Donovan »

There are a number of posts on this, but you can check out this thread which explains the procedure:

viewtopic.php?f=14&t=3836

Don
Donovan
Posts: 90
Joined: Wed Apr 24, 2013 12:08 pm
Location: KCMA

Re: PTT and FSUIPC

Post by Donovan »

Here's how the FSUIPC setup looks to map to a yoke button.
PTT_FSUIPC.png
PTT_FSUIPC.png (263.84 KiB) Viewed 7640 times
Post Reply