PE Client Model Set for ORBX GA Aircraft [P3D]

PE Client Model Set for ORBX GA Aircraft [P3D]

Postby MervA » Tue Sep 12, 2017 2:53 pm

======================================================
Pilotedge Client Model Set ORBX NA GA Aircraft P3Dv4
======================================================

If you have ORBX AI North American General Aviation Installed and working in your P3Dv4 sim, then you can use
this model set to help you see General Aviation AI aircraft while online to the Pilotedge Network, especially if you have deleted the
VIP + Squawkbox aircraft that was installed by the PE Client installer


Download Here


----------------------------
Installation
----------------------------
[1] Simply place the ftx.smd file into the ..\Pilotedge\aircraft\ directory.

[2] Then start the PE Client for your sim.

[3] Click on the [Start] button.

[4] Click on [Options] and select the Multiplayer Tab.

[5] Now select the model sets and move them to place in order shown below.

1. PilotEdge P3D/FSX Stock Models
2. ORBX FTX NA GA Airport Models


[6] Now close the Client, and your done !


Please Note :

Due to the suspected incompatibility of both the VIP and Squawkbox models for use in Prepar3Dv4. I highly
recommend deleting the vip.sms and sbx.sms files from ..\Pilotedge\aircraft\ directory and to stop the simulator
loading the aircraft go into your \Prepar3D v4\SimObjects\Airplanes\ directory and delete or remove both the vip and squawkbox
directories.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Aircraft Available in the ORBX NA General Aviation.
-------------------------------------------------------------------------

Piper Warrior 2, Piper Navajo, Piper Arrow 2+3+4, Lockheed Orion
Learjet 25+31+35+45+60
Gulfstream G550 + G-IV + G-IIB, Douglas DC3, Dornier D228, Canadair Challenger
Cessna Citation 2 : Cessna - C421, C414, C402, C208, C182, C177, C172, C152
BAe HS-125-800, Bombardier BD700, BD700 Express, Beechjet 400A
Beechcraft F90, B200, A100, Duchess, Baron 58 + 55, Bonanza 36
Gigabyte Z270 - HD3 | i7 7700K 4.5 Ghz | Corsair Hydro Cooler H60 |32GB Corsair DDR4 3200 | Windows 7 Pro 64bit | Nvidea GTX 1080 G1 8GB | SSD ScanDisk 240GB, Samsung 500GB | IDE Toshiba 2TB| Acer XB280HK 28" 4K/2K G-Sync Monitor
MervA
 
Posts: 119
Joined: Wed Jan 23, 2013 4:28 am
Location: Adelaide, Sth Australia

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby kadams587 » Fri Dec 01, 2017 11:20 am

Any tips on getting the NA GA pack installed into p3dv4? I used the migration tool to force ftx central to install the pack into V4, and I see the FTX NA GA aircraft in the simobjects folder. I have put your ftx.smd file into the PE aircrafts folder as instructed, but the rule does not show up in the PE client.
kadams587
 
Posts: 6
Joined: Mon Apr 24, 2017 1:54 am

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby MervA » Fri Dec 01, 2017 6:02 pm

kadams587 wrote:but the rule does not show up in the PE client.


Image
Your PE Client aircraft folder should have ftx.smd and at least pe.smd


Image
Pilot edge client Model Set Listing Section.


So you say unlike mine shown above you are unable to see the ORBX FTX NA GA Aircraft Models ?


Merv
Gigabyte Z270 - HD3 | i7 7700K 4.5 Ghz | Corsair Hydro Cooler H60 |32GB Corsair DDR4 3200 | Windows 7 Pro 64bit | Nvidea GTX 1080 G1 8GB | SSD ScanDisk 240GB, Samsung 500GB | IDE Toshiba 2TB| Acer XB280HK 28" 4K/2K G-Sync Monitor
MervA
 
Posts: 119
Joined: Wed Jan 23, 2013 4:28 am
Location: Adelaide, Sth Australia

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby kadams587 » Sat Dec 02, 2017 3:14 pm

I figured it out, I recently had to do a fresh windows install and I reinstalled the PE client as well. I actually had two instances on two different drives installed and I put the ftx.smd file into the wrong PE install. Haha, whoops! :lol:

Thanks for your help anyway

I am curious if it would be possible to write certain rules for when flying with friends one PE. Let's say you're both flying in an A2A Comanche or 182, and you want PE to show an actual A2A 182 or Comanche. Kind of like how FScloud does it with just another instance of the aircraft.
kadams587
 
Posts: 6
Joined: Mon Apr 24, 2017 1:54 am

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby MervA » Sat Dec 02, 2017 6:49 pm

kadams587 wrote:I am curious if it would be possible to write certain rules for when flying with friends one PE. Let's say you're both flying in an A2A Comanche or 182, and you want PE to show an actual A2A 182 or Comanche.


Possible Yes, but not advisable, due to the high frame rate hit that you would most likely get using aircraft like A2A or similar.


Merv
[N232Z][N544JH]
Gigabyte Z270 - HD3 | i7 7700K 4.5 Ghz | Corsair Hydro Cooler H60 |32GB Corsair DDR4 3200 | Windows 7 Pro 64bit | Nvidea GTX 1080 G1 8GB | SSD ScanDisk 240GB, Samsung 500GB | IDE Toshiba 2TB| Acer XB280HK 28" 4K/2K G-Sync Monitor
MervA
 
Posts: 119
Joined: Wed Jan 23, 2013 4:28 am
Location: Adelaide, Sth Australia

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby kadams587 » Sat Dec 02, 2017 7:45 pm

I've peeked at your ftx.smd in notepad++, would you mind sharing how you know/find the aircraft names for the .smd? I'd like to play around with it a little bit, at my own risk of course ;)

Thanks,
Kyle
kadams587
 
Posts: 6
Joined: Mon Apr 24, 2017 1:54 am


Return to Prepar3D

Who is online

Users browsing this forum: No registered users and 1 guest