Postby w6jl@sbcglobal.net » Mon Jan 07, 2019 12:20 pm

I notice that my level reached on the Pilot Roster of Rated Pilots is several flights behind my actual level. (I am now at I-10 as of Jan 7, and will be attempting the I-11 soon, but the Roster shows I-7 for me). How and when is this list updated? It seems that earlier, almost as soon as I completed the flight, it would show up on the roster.

Don H.
Posts: 6
Joined: Sun Oct 14, 2018 2:53 pm


Postby RogerW » Mon Jan 07, 2019 1:33 pm

did you verify the update on the roster before logging off PE? If it wasn't on there and you logged off, it's gone into the bit bucket and recycled. Nothin anyone can do. It's a common mistake people make. Always make sure you see it. Shut sown the plane and go look. When you see it, it is safe to log out.

Also a lot of people log out on the taxiway. You must taxi to a non movement area of the ramp before the software will update your pass.
Roger W.
Home: Valkaria, Fl (X59)(but lost in SoCal)
PE Rating: CAT-11, I-2
Experience: RW 7 hrs, Virtual 3000+ hrs
Aircraft: A2A Cessna 182 Skylane
Tail Number: N7365W
YouTube: https://www.youtube.com/channel/UCitoWLTiAXGgFbagrJnQyrw
Posts: 82
Joined: Sun Mar 25, 2018 5:47 pm
Location: Valkaria, Fla (X59) USA


Postby Keith Smith » Mon Jan 07, 2019 2:39 pm


See the Taking the Tests page: https://www.pilotedge.net/pages/taking-the-tests

It seems that you neglected to follow the procedure on each of the last few ratings, and that the controllers didn't check your CURRENT rating before letting you attempt the next rating. If you'd like to review the ATC audio from your flights to locate the portions where the controller issues the passing grade for the I-8 and I-10, then I will take the time to manually post the I-8 and I-10 results to your account so that you can commence the I-11. Failing that, you can repeat the I-8 and I-10 using the correct procedure, which is bullet proof.

This issue comes up almost daily, though, pilots really need to be following that procedure closely or the system doesn't work.
Keith Smith
Posts: 9551
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Return to General

Who is online

Users browsing this forum: Google [Bot] and 1 guest