Connection Issues?
Posted: Sun Aug 25, 2019 3:32 pm
Hello,
During my trial period of PE, I experienced some connection issues. Did some googleing and then found a couple of ports to forward. After forwarding those ports my problem appeared to go away. Fast forward a month or two and my problem is back. I was disconnected at least 5-7 times today within about 10 minutes or so until I gave up and did the rest of the flight offline. Right before a disconnected everyones voice starts to break up badly. I ran a speed test to make sure it wasn't my internet but I was getting the usual 950ish download and 60 upload with 0% packet loss. So I don't think my internet was the issue today.
Just FYI TCP forwarded 5558-5559
UDP forwarded 9986 - 9987.
I'm not sure if this is the relevant data from PilotEdeg_out because there is no time stamp but heres this for what it's worth.
I hope somebody can help!
During my trial period of PE, I experienced some connection issues. Did some googleing and then found a couple of ports to forward. After forwarding those ports my problem appeared to go away. Fast forward a month or two and my problem is back. I was disconnected at least 5-7 times today within about 10 minutes or so until I gave up and did the rest of the flight offline. Right before a disconnected everyones voice starts to break up badly. I ran a speed test to make sure it wasn't my internet but I was getting the usual 950ish download and 60 upload with 0% packet loss. So I don't think my internet was the issue today.
Just FYI TCP forwarded 5558-5559
UDP forwarded 9986 - 9987.
I'm not sure if this is the relevant data from PilotEdeg_out because there is no time stamp but heres this for what it's worth.
Code: Select all
falling behind, solidering on with ptime: track count 20, prevTrack->time 5260.623208, PI->time 5254.289598, proposed time 5260.838784, delta = -6.549186
entered disconnect callback, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 253
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() complete
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_voltage.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_groundspeed.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_com_selector.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_com1_frequency.txt
Connecting NKS979 with ICAO type: A319
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 54,55
Checking for traffic relay file...
COM2 is now considered to be off
entered disconnect callback, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 253
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() complete
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_voltage.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_groundspeed.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_com_selector.txt
looking for C:\Program Files\X-Plane 11\Aircraft\ToLiss319V1p3p3\PE_com1_frequency.txt
Connecting NKS979 with ICAO type: A319
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 56,57
Checking for traffic relay file...
COM2 is now considered to be off
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 38
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() comple