Page 1 of 1

Newbie - Radio Check

PostPosted: Sun Feb 14, 2021 2:54 pm
by AZWildk4t
I just signed up with PE and trying to do first flight. There’s an optional step to do the radio check. I tuned both radios to 123.45 but cannot hear my radio check. I saw in a post that dual comms not working. Is that the issue here? How can I do the radio check without interfering with ATC?

5A14D5E1-1558-48DA-B029-FC0192990C07.png
5A14D5E1-1558-48DA-B029-FC0192990C07.png (1021.76 KiB) Viewed 346 times

Re: Newbie - Radio Check

PostPosted: Sun Feb 14, 2021 3:04 pm
by Kevin_atc
Look at your com radio. You only have com1 set to 123.45...in fact, even the text in the box says so. You need 123.45 in both com1 and com2 actives. If you don't have a COM2, choose a plane that has 2 com radios just for the sake of the radio check, then you can switch back to the single com plane later.

P.S. Go Devils

Re: Newbie - Radio Check

PostPosted: Sun Feb 14, 2021 3:22 pm
by AZWildk4t
Thanks for the reply. Ill give that a try

Re: Newbie - Radio Check

PostPosted: Mon Feb 15, 2021 5:46 pm
by AZWildk4t
Hi Kevin.

I have resolved this issue. Thanks for the assist.