Out of the blue, I cannot connect with the PE client. After selecting an aircraft and clicking 'Connect', I get an error dialog that says "An error has occured. Click OK to abort SquawkBox. (11). Screen shot below:
The are only two new things about my FSX/PE setup since the client last worked (which was just this past weekend):
(1) I installed AivlaSoft's Electronic Flight Bag add-on and (2) I had just added a new aircraft, a Cessna Citation immediately before this problem.
I've tried removing the recently-added Citation, restarting FSX and rebooting my system -- none of these things helped. I'll try removing the AivlaSoft EFB add-on next (it would be a real bummer if that was the problem, but PE is more valuable to me than the EFB).
Any suggestions? Any idea what the error dialog means?
[fixed] Crashing Client
-
- Posts: 401
- Joined: Thu Dec 22, 2011 11:42 pm
- Location: Longmont, CO
[fixed] Crashing Client
Mark Hargrove
Longmont, CO
PE: N757SL (Cessna 182T 'Skylane'), N757SM (Cessna 337 'Skymaster'), N757BD (Beech Duke Turbine)
Longmont, CO
PE: N757SL (Cessna 182T 'Skylane'), N757SM (Cessna 337 'Skymaster'), N757BD (Beech Duke Turbine)
-
- Posts: 401
- Joined: Thu Dec 22, 2011 11:42 pm
- Location: Longmont, CO
Re: Crashing Client - Disregard
Disregard. I rebooted one more time and the problem went away.
That was weird.
-M.
That was weird.
-M.
Mark Hargrove
Longmont, CO
PE: N757SL (Cessna 182T 'Skylane'), N757SM (Cessna 337 'Skymaster'), N757BD (Beech Duke Turbine)
Longmont, CO
PE: N757SL (Cessna 182T 'Skylane'), N757SM (Cessna 337 'Skymaster'), N757BD (Beech Duke Turbine)
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: Crashing Client
Very odd. Not sure what was happening there, sorry.
Re: Crashing Client
I am having the exact same problem. I deleted the aircraft I added and restarted a few times. Did you do anything else??
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: Crashing Client
Tony,
Verify headset is connected and is configured as the default recording device?
Verify headset is connected and is configured as the default recording device?