I get this error message aborting unable to get required pilot data from FSInfo. when I try to login on line.
Help Dorian
Protocol error [fixed]
-
- Posts: 76
- Joined: Thu Oct 07, 2010 6:50 am
Re: Protocol error
This was from the common error thread.
Issue: Login fails with this message: SendLoginInfo () aborting, unable to get required pilot data from FSInfo
Solution: Don't attempt to connect until your aircraft is positioned on a ramp, and not still on the free flight configuration screen.
Let me know if this does not fix it.
Issue: Login fails with this message: SendLoginInfo () aborting, unable to get required pilot data from FSInfo
Solution: Don't attempt to connect until your aircraft is positioned on a ramp, and not still on the free flight configuration screen.
Let me know if this does not fix it.
Brian Ratledge
Pilot Client Support Team
brian (at) pilotedge (dot) net
Pilot Client Support Team
brian (at) pilotedge (dot) net
Re: Protocol error
The aircraft is postion at a parking ramp or gate what do you mean not still on free flight config screen
-
- Posts: 76
- Joined: Thu Oct 07, 2010 6:50 am
Re: Protocol error
You should wait to run the PilotEdge software until your plane is sitting on the ramp or at your gate. If you try to run it from any point prior to that you will get the error.
Example: When you first start the sim you have to select the airport and aircraft type you are going to fly. Then you have to actually go there and be sitting in the cockpit before you start PilotEdge.
Example: When you first start the sim you have to select the airport and aircraft type you are going to fly. Then you have to actually go there and be sitting in the cockpit before you start PilotEdge.
Brian Ratledge
Pilot Client Support Team
brian (at) pilotedge (dot) net
Pilot Client Support Team
brian (at) pilotedge (dot) net
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: Protocol error
Btw, now that we know when this error occurs, I will update the error message to be user friendly instead of stating a code-level issue.
That will be in the next release, along with the long awaited sound device selection.
That will be in the next release, along with the long awaited sound device selection.
Re: Protocol error
That is where I always start is at a gate or ramp in side the aircraft. And I get that error message. I did get on line one time but for some reason cannot reconnect .
-
- Posts: 76
- Joined: Thu Oct 07, 2010 6:50 am
Re: Protocol error
You can also get that error if the sim is paused. Please verify the following:
In MSFS, under Settings → General, please turn OFF “Pause on task switch”.
In MSFS, under Settings → General, please turn OFF “Pause on task switch”.
Brian Ratledge
Pilot Client Support Team
brian (at) pilotedge (dot) net
Pilot Client Support Team
brian (at) pilotedge (dot) net
Re: Protocol error
That what it was I had FSX in pause. I unpaused it and no error message.
Thanks for your help
Dorian
Thanks for your help
Dorian
-
- Posts: 76
- Joined: Thu Oct 07, 2010 6:50 am