clearance

Real World VFR, IFR and Coast to Coast discussion area
Post Reply
GHA2020
Posts: 4
Joined: Mon Aug 11, 2014 12:13 pm

clearance

Post by GHA2020 »

what will be an example of clearance if departing runway is 11
Keith Smith
Posts: 9940
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: clearance

Post by Keith Smith »

For runway 11 you might hear:
"Cleared to Palomar Airport, fly runway heading, vectors Seal Beach VOR, V64 V363 DANAH V23 Oceanside VOR, direct. Maintain 3000, expect 5000 5 minutes after departure. Departure frequency 127.20, squawk 4231."

TOA is a unique airport, the routings and departure frequency that are used from there are dependent upon the runway in use and even the runway configurations at nearby John Wayne Airport.

Here are the TEC routes from TOA to CRQ. Notice that they not only vary by aircraft type, but departure runway, and as mentioned above, the SNA runway configuration: http://myflightroute.com/tecsub.php?start=KTOA&end=KCRQ
GHA2020
Posts: 4
Joined: Mon Aug 11, 2014 12:13 pm

Re: clearance

Post by GHA2020 »

keith please give me 2 or3 more examples of airports with this kind of clearance if you can
keep up the good work
regards
Keith Smith
Posts: 9940
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: clearance

Post by Keith Smith »

The program contains 7 IFR clearances. Is there something you'd like me to cover that isn't included by the range of clearances already provided in the program?
Post Reply