New Member - !st Flight
New Member - !st Flight
I am a new member and received the audio for ATC. However, when I pushed my PTT, I had no modulation. Any suggestions to correct this problem - Thanks
-
- Posts: 819
- Joined: Sat Jan 18, 2014 5:13 pm
Re: New Member - !st Flight
Sim?
OS?
What is your computer default audio settings?
What is your PTT set to in the sim/PilotEdge client?
OS?
What is your computer default audio settings?
What is your PTT set to in the sim/PilotEdge client?
Kyle Sanders
Re: New Member - !st Flight
Kyle,
Thanks for the response. I'm using FSX Gold Edition. What should the computer default setting should be so I can transmit? The PTT is set to one of the top buttons on the CH Yoke. How should it be set in the PilotEdge client?
Thanks a million and I look forward to your response so I can get up and flying!!!!
Rightseat
Thanks for the response. I'm using FSX Gold Edition. What should the computer default setting should be so I can transmit? The PTT is set to one of the top buttons on the CH Yoke. How should it be set in the PilotEdge client?
Thanks a million and I look forward to your response so I can get up and flying!!!!
Rightseat
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: New Member - !st Flight
Welcome to Pilotedge. I've moved your topic to the FSX client forum. Please use the most specific forum available when creating a forum. This avoids us having a ton of FSX support messages in the General forum.
There are two approaches for joystick-based PTT with PE and FSX:
1) Map the CH Yoke button to a keystroke using a 3rd party tool, then map the keystroke to the PE PTT in the PilotEdge applicaton, or
2) use the registered version of FSUIPC to trigger the PE PTT directly
Since you're just getting started, I'd recommend simply trying the service and use the keyboard to trigger the PTT for now. If your sim is running as Administrator, you'll need to run the pilot client as Administrator, too.
There are two approaches for joystick-based PTT with PE and FSX:
1) Map the CH Yoke button to a keystroke using a 3rd party tool, then map the keystroke to the PE PTT in the PilotEdge applicaton, or
2) use the registered version of FSUIPC to trigger the PE PTT directly
Since you're just getting started, I'd recommend simply trying the service and use the keyboard to trigger the PTT for now. If your sim is running as Administrator, you'll need to run the pilot client as Administrator, too.
Re: New Member - !st Flight
Keith,
I'll give it a try and thanks again for your fine assistance. Of course, it's always one more challenge to get it working.
Thanks,
Rightseat
I'll give it a try and thanks again for your fine assistance. Of course, it's always one more challenge to get it working.
Thanks,
Rightseat