Disconnecting vom PE after landing

Post Reply
Thomas_Horn
Posts: 77
Joined: Fri Jan 02, 2015 3:18 am

Disconnecting vom PE after landing

Post by Thomas_Horn »

Sometimes, when the controller seems to be very busy, I disconnect from PE after I landed and cleared the runway - so I do not wait for parking instructions.
I observed however that my flight is not logged on PE Aware when I do this.

So it seems it is kind of "mandatory" to end each PE flight with the parking instructions from the controller? Please advice.

Thanks, Thomas
X-Plane 11.32, Windows 10, 4.8 GHz 7700K, 16 GB RAM. 4K 55'' Screen resolution with Nvidia GTX 1070. ELITE and PFC flight controls
cruster
Posts: 25
Joined: Sat May 30, 2015 4:57 am

Re: Disconnecting vom PE after landing

Post by cruster »

Years ago, when I was using VATSIM for pseudo-ATC, I noticed the tracker they used (same one as PEAware, more or less) would not register a flight as "arrived" without some amount of ground travel. I assume it was because the tracker algorithm needs to see some low-speed, low-level movement to make that "arrived" determination. I've always taxied to parking on PE, so I never noticed the same thing happened here.
Kevin_atc
Posts: 2039
Joined: Sat Nov 13, 2010 7:01 pm

Re: Disconnecting vom PE after landing

Post by Kevin_atc »

Kevin
PilotEdge Marketing
Want faster answers to your forum questions? Join our Discord community: www.pilotedge.net/discord
Post Reply