palm springs tec route

Post Reply
damien
Posts: 24
Joined: Mon Sep 02, 2013 6:33 pm

palm springs tec route

Post by damien »

Flew kpsp-kvny last night on pspp2 tec route. My chart shows v388 deway pom vny. The controller said they had something different and took me through itsme and v186. Just curious which one was correct?
Marcus Becker
Posts: 982
Joined: Fri Feb 08, 2013 5:12 pm

Re: palm springs tec route

Post by Marcus Becker »

https://gyazo.com/31f887e4095964a1aecac5f018334d2b
This is from the charts supplement.
PSPP2 is for J and M class and is V388 DEWAY POM VNY
PSPP1 is for P and Q class and is V388 PDZ V186 VNY

I guess it depends on what type of aircraft you were flying.
Image
damien
Posts: 24
Joined: Mon Sep 02, 2013 6:33 pm

Re: palm springs tec route

Post by damien »

Yes that's what I have. It was a jet. The controller's tec route had something different.
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: palm springs tec route

Post by Keith Smith »

And here's a screenshot from the FAA preferred route database with current data (courtesy of Peter): https://gyazo.com/f7675835e95606ac27937b2341e04a4f

Unfortunately, the FAA preferred route database is not agreeing with the Chart Supplement, so it's hard to know which one is correct. We'll see if we can find out and will paste an update either way.
damien
Posts: 24
Joined: Mon Sep 02, 2013 6:33 pm

Re: palm springs tec route

Post by damien »

Thanks Keith!
Post Reply