Hi,
I'm running XP11. I'm able to transmit and receive on COM 1 but for some reason, even though COM 2 is audible, I am unable to transmit on COM 2.
What could I be doing wrong?
Thanks for your help.
Com 1 and Com 2 Technical Issues
Re: Com 1 and Com 2 Technical Issues
I know nothing about X-Plane, specifically, but in the real world "Audio Panel" there is a switch that allows the pilot to switch between "Transmit Comm 1/Transmit Comm2/ Transmit Both" I fly FSX (still) and in the control menu there is a provision for assigning a button, switch or keyboard key for either comm1 or comm 2. Same for FSUIPC (which is what I use). In my cockpit I built my own Audio Panel from Cockpit PhD parts, and I have a rotary switch that I can switch from transmitting on radio 1 or 2. I have not found a way to transmit of both simultaneously (at least in FSX?FSUIPC) as in some RW units. I don't know if this is possible in X-Plane. I you're curious, for pix of my cockpit see
https://fsxtimes.wordpress.com/2019/07/ ... more-22727
Hope this helps.
Ken
https://fsxtimes.wordpress.com/2019/07/ ... more-22727
Hope this helps.
Ken
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: Com 1 and Com 2 Technical Issues
Moving this to the xplane forum. This is covered in this sticky post in that same forum regarding how to transmit on com1 vs com2: viewtopic.php?f=12&t=5690
Keith
Keith