performance calculations

Post Reply
FDXDave
Posts: 202
Joined: Mon Jul 17, 2017 7:56 pm

performance calculations

Post by FDXDave »

So how does one know the Available runway from an intersection? I've been estimating but I'm thinking there likely is a document somewhere to show this actual info. The runway i was figuring today was (KLAS) 08L from A8 intersection. Skyvector shows the TORA:14515 . But this would be full length. Where do i look for intersection runway distance?
Thanks.
Dave.
zerofay32
Posts: 131
Joined: Tue Aug 19, 2014 8:34 am
Location: Grove City, Ohio

Re: performance calculations

Post by zerofay32 »

I would imagine jeppesen charts might have it, but I usually use the measure tool in Foreflight (press two fingers on the map screen and get a ruler) or measure the distance on google earth or some other maps application.
Andrew Fay
PilotEdge V-3; CAT-11; I-11; Skyhigh 10
Commercial Pilot/Instrument ASEL/AMEL- KOSU / Commercial sUAS
Scott Medeiros
Posts: 321
Joined: Sat Apr 12, 2014 8:49 am
Location: Atlanta, GA

Re: performance calculations

Post by Scott Medeiros »

There is no document that directly gives you this information, including Jeppesen charts. The Jepp FDPro app has a feature that’ll allow you so seen how much runway you have up to a specific taxiway exit, but nothing specific for intersection departures.
FDXDave
Posts: 202
Joined: Mon Jul 17, 2017 7:56 pm

Re: performance calculations

Post by FDXDave »

Thank you both for your answers and available tools.
Dave
Post Reply