clicking noise starts going then about 5-10 later, freeze
clicking noise starts going then about 5-10 later, freeze
This is only happening when using Pilotedge. I start getting a beep sound, the kind where if you were using windows and there is an error. Then I start getting it alot then after about 5-10 minutes of the click/beep noise P3D freezes up. I then have about 30 seconds to a minute were I can talk to the controller. Sometimes it gives me a memory error message. Anybody else have these sudden freezes?
Andrew Roberts
Real World Private Pilot w/instrument
Walnut Creek, CA
PE callsign: N56PA
Real World Private Pilot w/instrument
Walnut Creek, CA
PE callsign: N56PA
-
- Posts: 9939
- Joined: Sat Oct 09, 2010 8:38 pm
- Location: Pompton Plains, NJ
- Contact:
Re: clicking noise starts going then about 5-10 later, freez
Are you using a keyboard-based PTT? If so, can you make sure that you're using a non-printable character (such as the LEFT CONTROL key), rather than a printable character (ie, one of the letters of the alphabet or a symbol?)
I do recall seeing a case during testing where a printable character would work as the PTT, but it would fill up the text entry area after long term use. Perhaps that is causing the issue.
I do recall seeing a case during testing where a printable character would work as the PTT, but it would fill up the text entry area after long term use. Perhaps that is causing the issue.
Re: clicking noise starts going then about 5-10 later, freez
I have been using the caps key. I will try the left control key though see if that changes anything
Andrew Roberts
Real World Private Pilot w/instrument
Walnut Creek, CA
PE callsign: N56PA
Real World Private Pilot w/instrument
Walnut Creek, CA
PE callsign: N56PA
-
- Posts: 60
- Joined: Sun Nov 16, 2014 2:45 pm
Re: clicking noise starts going then about 5-10 later, freez
Check this link>>> http://forum.simflight.com/topic/71348- ... by-fsuipc/
Jacques Le Roux
N841LR
N841LR