Page 1 of 2
LOST COMMS XPlane v 10.4 beta 9
Posted: Mon Aug 17, 2015 9:35 pm
by Robert McDonald
Hi all,
I have recently encountered a problem where I'm losing connection to PE about midway in my flight between KLAS and KSAN. The waypoint I dropped out today at was MOMAR. Is anyone ELSE experiencing loss of comms to PE since upgrading to beta 9 of XPlane?
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 3:13 am
by Kyle.Sanders
Is your sim crashing or are you just being disconnected from the PE network?
Do the flight again and post the log.txt file and someone may be able to help you out with that info too.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 1:11 pm
by Robert McDonald
Hi all,
Re did the flight today (Wednesday August 18th) same deal, lost comms in almost the identical spot... posting the log.txt
The flight continued.. but no comms. Tried to disco then reconnect the PE Plugin from within XPlane... it reported "disconnected" then "connected to pilot edge" when I tried that, but I still could NOT communicate with PE.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 2:21 pm
by Nelson L.
Almost looks like a Carenado issue, though I'm by no means an expert at reading logs. If it wasn't there before, it's probably the beta that's causing problems.
Edit - Hmm, actually, it looks like it's something about the CSLs. I have no idea about Gizmo as I don't have it installed, but that's something to look into. If the problem persists into the release version, you'll just have to remove all plugins and re-insert them 1 by 1 until there's a conflict.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 3:36 pm
by Kyle.Sanders
I also, am not an expert, but I do not believe it to be a problem specifically with Carenado.
The problem may lie with the Gizmo plug-in.
Code: Select all
Clean exit from threads.
Gizmo64: Plugin Disable..
Gizmo64: Destroying Mouse Trap..
Gizmo64: UnRegister key sniffer..
Gizmo64: UnRegister Callbacks..
Gizmo64: gizmo_Stop
Gizmo64: Shutting down Lua VM
Gizmo64: Releasing X-Plane overrides: sim/operation/override/*
Gizmo64: Killing curl..
Gizmo64: Killing mapping..
Gizmo64: Killing particles..
Gizmo64: Thread sleep..
Gizmo64: curl_global_cleanup..
Gizmo64: Plugin Disabled.
SkyMaxx Pro: SilverLining deleted.
Gizmo64: XPluginStop() complete.
Suggested DIY Troubleshooting:
Try to see if there is an update for Gizmo.
If none, it may be an issue with the latest X-Plane beta as Nelson has suggested. Launch your updater application and uncheck "Beta". Run the updater with it unchecked and it will return it to the last release version.
If it still fails, I'm not sure what to tell you. Contact PE for tech support.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 3:49 pm
by Kyle.Sanders
This could also be time-based... about how long are you into the flight?
Try that same time in a different area of PE coverage area and see if it happens.
Aircraft specific? Try different aircraft along that route. Maybe default aircraft that doesn't use any custom plug-ins? (I know... nasty words haha)
Does this happen during/near a frequency change?
This only happened after the XP Beta update so, that is most likely the cause. If this is a aircraft/plug-in developer issue, they likely won't release an update to patch things up until at least in RC stage but worth reporting to them if found to be an issue with their plug-in.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 4:07 pm
by Nelson L.
Kyle, I'm actually not so sure about Gizmo - that was located at the very end of the log, right before XP shut down. Unless it was a XP crash, I doubt it was the cause. It's hard to troubleshoot from a Beta without removing all the plugins, so I would honestly just go back to .36 and wait for the official release. Maybe it'll be fixed by then. From what I've read (or lack thereof), there's a chance this is an isolated issue.
PS - What is Gizmo? Is it sort of like LUA?
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 4:22 pm
by chevyrules
Nelson L. wrote:
PS - What is Gizmo? Is it sort of like LUA?
http://www.x-aviation.com/catalog/gizmo.php
It's like SASL( which Carenado uses I believe).
Unlike SASL though where it only runs when you use a product that uses SASL, Gizmo is always running.
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Tue Aug 18, 2015 4:36 pm
by Kyle.Sanders
I agree with Nelson. Take it back to the last release .36
Re: LOST COMMS XPlane v 10.4 beta 9
Posted: Fri Aug 21, 2015 10:03 pm
by Robert McDonald
See attached Pilot_edge_Out text file (zipped)
Please note Pilot Edge comms worked fine entire flight until just after Lyndi. I was cleared LOC 27 appch via SoCal APPCH and then lost comms. this happens EVERY flight, both directions, it is not just a KSAN issue.
Xplane 10.4 Beta 9.
Latest PE.
Note: This problem did not occur until Beta 9 xplane 10.4