[1830PDT Oct 10 2016] Flying the first 3 CAT ratings

announcements, discussions and recordings of PilotEdge real-time workshops

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby BFG » Tue Oct 11, 2016 4:26 am

Thanks, Kyle. It's showing up for me. Dropbox might have had a problem or it might be firewalled for you?
BFG
 
Posts: 207
Joined: Sat Apr 16, 2016 10:39 pm

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Keith Smith » Tue Oct 11, 2016 6:31 am

Images are working for me on 2 different devices.

Thx to everyone who came to the workshop. That was quite a night, I'll post a debrief shortly.
Keith Smith
 
Posts: 9356
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Kyle.Sanders » Tue Oct 11, 2016 7:08 am

Yeah. I checked with another device and all is good. I will figure it out
Best Regards,
Kyle Sanders

Twitch Channel
Facebook Page

i7 6700k 4gHz
16GB RAM
GTX 970 4GB GPU
Windows 10 Home 64bit
X-plane 10 & 11 (always up to date/never beta)
Kyle.Sanders
 
Posts: 811
Joined: Sat Jan 18, 2014 5:13 pm

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Kilstorm » Tue Oct 11, 2016 9:53 am

That was my first group flight in some time and I enjoyed every minute of it. Flying in VR using the Oculus Rift in P3Dv3.4 with all the great visual sliders up gave the feeling of complete immersion and stress. I did have one small hiccup prior to the beginning of leaving Oceano while doing pattern work. My Active Sky wake turbulence was set high and while on short final with 2-3 planes waiting I looked like a complete non-flyer on my controlled crash (CD was set off). I left the pattern upwind and got high over the water away from all traffic and turned that off. So anyone who saw Cherokee569FL on a horrible off runway landing at L52 last night...that was why.
Nathan Palmer
Nantucket, MA
Cherokee N569FL
Rocky Mountain Airways DHC6 N24RM
Image
Kilstorm
 
Posts: 137
Joined: Sun Jan 19, 2014 7:38 am

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Keith Smith » Tue Oct 11, 2016 4:06 pm

A temporary raw archive from the workshop is available here for the next two weeks:
https://www.twitch.tv/ksmith_pe/v/94221509

If all goes well this will be split up and parted out for the CAT-1 and CAT-3 ratings. The CAT-2 will need to be reflown. That would be a #1 contender for Understatement of the Year.
Keith Smith
 
Posts: 9356
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby tbaac » Tue Nov 01, 2016 7:03 am

Hi. Did the CAT1 video get saved anywhere on youtube? I watched it on Twitch but its gone now so I was hoping it had found a more permanent home.
Thanks.
tbaac
 
Posts: 38
Joined: Sat May 14, 2016 2:32 pm
Location: EGLF, England

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Keith Smith » Tue Nov 01, 2016 7:10 am

The CAT1 and CAT3 were saved as highlights just before twitch deleted the original video after 2 weeks. They're in my highlights right now: https://www.twitch.tv/ksmith_pe/videos/highlights, but I'll get them onto YT and embedded on the workshop pages when able.
Keith Smith
 
Posts: 9356
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby tbaac » Tue Nov 01, 2016 7:52 am

Great, thanks Keith.
Twitch is fine, I just didn't know where to find them :oops:
tbaac
 
Posts: 38
Joined: Sat May 14, 2016 2:32 pm
Location: EGLF, England

Re: [1830PDT Oct 10 2016] Flying the first 3 CAT ratings

Postby Keith Smith » Tue Nov 01, 2016 8:15 am

Any time you're looking at someone's twitch channel, look at the top of the page, there's a section titled 'Videos' followed by the number of videos they have online. Click that, then you can filter by uploads, past broadcasts or highlights.
Keith Smith
 
Posts: 9356
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Previous

Return to Workshops

Who is online

Users browsing this forum: No registered users and 0 guests