XPlane 11 running slow after Pilot Edge Connect

Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: XPlane 11 running slow after Pilot Edge Connect

Post by Keith Smith »

That is very odd. There are no known issues regarding frame rates drops other than the issue with the VSProTrafficRelay.ini file. Could you post your PilotEdge_out.txt file after you connect and disconnect?
msmith3972
Posts: 20
Joined: Fri Dec 22, 2017 1:59 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by msmith3972 »

Starting up: PilotEdge client, V1.3.1p
initVoice with device NULL, returned 0
PilotEdge initialized
Entered deferred startup
completed deferred startup
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for C:\Users\Smith\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\PE_voltage.txt
looking for C:\Users\Smith\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\PE_groundspeed.txt
Connecting N374SA with ICAO type: C172
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 7,10
Checking for traffic relay file...
Traffic relay file found, address = 10.0.0.183
COM2 is now considered to be off
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 37
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() complete
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for C:\Users\Smith\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\PE_voltage.txt
looking for C:\Users\Smith\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\PE_groundspeed.txt
Connecting N374SA with ICAO type: C172
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 14,15
Checking for traffic relay file...
Traffic relay file found, address = 10.0.0.183
COM2 is now considered to be off
received MSG_LEFT for KS31_3, plane not found
received MSG_LEFT for LPC43, plane not found
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 37
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() complete
msmith3972
Posts: 20
Joined: Fri Dec 22, 2017 1:59 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by msmith3972 »

Based on that file output, for S&G I loaded the cirrus vision instead of the C172 and low and behold, no frame rate drop! Amazingly I didn't crash the cirrus, but I would prefer to use the C172. Any idea how to fix it?
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: XPlane 11 running slow after Pilot Edge Connect

Post by Keith Smith »

Traffic relay file found....

That means it's trying to relay traffic to the ipad. Check your vspro resources folder for that file.
msmith3972
Posts: 20
Joined: Fri Dec 22, 2017 1:59 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by msmith3972 »

Keith Smith wrote:Traffic relay file found....

That means it's trying to relay traffic to the ipad. Check your vspro resources folder for that file.
The next line under it says that it found the traffic relay file, so I don't see the problem there. Plus, like I also said, I loaded up the sim with the cirrus vision and it worked fine. Seems to have a problem with the cessna 172 with g1000?
Keith Smith
Posts: 9939
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:

Re: XPlane 11 running slow after Pilot Edge Connect

Post by Keith Smith »

You are misunderstanding. The issue is NOT that it can't find the traffic relay file. The issue is that it IS finding the relay file and is ATTEMPTING to send data to the IPad at the specified IP address. If the IPad has changed IP addresses or isn't powered up, then it's going to bring the sim to its knees. This is a common issue.

For now, keep the file named as .bak (not .ini) and verify via the log file that it is NOT sending traffic to the Ipad any more, then see what happens in terms of frame rate.
activa
Posts: 4
Joined: Fri Jan 26, 2018 1:55 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by activa »

I have the EXACT same issue, and my log has no mention of the traffic relay file (I don't use a ForeFlight iPad for traffic).

When I load the Cirrus Jet in X-Plane 11, everything works perfectly. When the C172 is used, the frame rate drops after exactly 10 minutes, every single time. At first it drops to 15 FPS and later on it drops even further to something as low as 1 FPS, which makes the sim effectively unusable. If I leave everything untouched, the simulator eventually crashes.

Before:

Image

After 10 minutes:

Image
activa
Posts: 4
Joined: Fri Jan 26, 2018 1:55 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by activa »

Is this forum monitored by PilotEdge staff?

I'm on my two week trial and because of the problem described above, this product is useless for me. Since it seems that I'm not the only one suffering from this issue, and it was first reported some time ago, I would at least have expected that there was a response from PilotEdge staff to this
joomie
Posts: 42
Joined: Fri Nov 18, 2016 6:49 am

Re: XPlane 11 running slow after Pilot Edge Connect

Post by joomie »

Keith Smith is the founder of Pilotedge.
He replied here.
X-Plane 11.00pb3, Win 10 (64bit), ASUS Z170 PRO GAMING, Intel Core i7 6700K@4.5 GHz, Inno3D iChill GTX 1080 X3 (no OC), 32GB DDR4 RAM, ASUS Strix SOAR sound card, 1.25 TB SSD, SAMSUNG SUHD 55'' TV 3840x2160, TrackIR5.4.2
activa
Posts: 4
Joined: Fri Jan 26, 2018 1:55 pm

Re: XPlane 11 running slow after Pilot Edge Connect

Post by activa »

joomie wrote:Keith Smith is the founder of Pilotedge.
He replied here.
Yes, a month ago, but didn't really offer a solution.

When PilotEdge is enabled and the standard X-Plane C172 G1000 is used, the simulator is unusable after 10 minutes. Frame rates drop to 1 FPS before it eventually crashes. Turning off PilotEdge, the problem goes away. Using any other airplane in X-Plane 11 works fine too. That was the exact problem that the other person had, and it has nothing to do with that traffic relay file
Post Reply