PE Client Model Set for ORBX GA Aircraft [P3D]

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby ChuckOman » Tue May 01, 2018 7:43 am

Thanks Merv - sensible approach - will give it a try.

BTW assume you are seeing B58 GA traffic at KNZJ with your P3D4 traffic sliders set to zero, and that your utl_client.exe is running, but commercial and GA UTL traffic set to zero, right ?

Chuck
ChuckOman
 
Posts: 34
Joined: Wed Jul 09, 2014 7:55 pm

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby MervA » Wed May 02, 2018 3:22 am

Yes, I do see the BE58 from the ORBX GA Model flying around El Toro.

If you wish, you can use the UT Live client with the Airline slider only set to whatever 50% maybe, then in the Prepr3Dv4.1 traffic section
have the GA slider only, set to similar, in that way you will get airlines from UTLive, and GA traffic from the default sim aircraft, and I believe if you then connect
online you will also get online traffic, but I don't use anything but the PE Client while online with no labels, so I can't confirm all three scenario's working together,
but the first two will.

Merv
Gigabyte Z270 - HD3 | i7 7700K 4.5 Ghz | Corsair Hydro Cooler H60 |32GB Corsair DDR4 3200 | Windows 7 Pro 64bit | Nvidea GTX 1080 G1 8GB | SSD ScanDisk 240GB, Samsung 500GB | IDE Toshiba 2TB| Acer XB280HK 28" 4K/2K G-Sync Monitor
MervA
 
Posts: 131
Joined: Wed Jan 23, 2013 4:28 am
Location: Adelaide, Sth Australia

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby ChuckOman » Thu May 03, 2018 6:58 am

I also prefer to fly on PE with just the PE client traffic.

But just wanted to confirm that when you are using the PE client this way, it works even though the utl_client.exe is running concurrently (albeit with both UTLive traffic level settings =0), and the P3D4 AI traffic sliders also set to zero. (i.e. that the PE client is injecting online traffic independently of utl_client.exe and the P3D4 AI traffic system).

When I do see PE online traffic, it is always labeled "Ultimate Traffic Live", and the labels only appear when the traffic is in the air. Makes me suspect that on my system the utl_client.exe is somehow intercepting the PE client online traffic....

Chuck
ChuckOman
 
Posts: 34
Joined: Wed Jul 09, 2014 7:55 pm

Re: PE Client Model Set for ORBX GA Aircraft [P3D]

Postby ChuckOman » Thu May 03, 2018 1:38 pm

Hi Merv - Did the El Toro test, starting with just pe.smd. Discovered the problem was the ftx.smd file. I see the B350 traffic when I have the pe.smd, vip.sms and utl.smd files in the PE Client. Makes no difference what priority I assign to the ftx.smd model set. Not clear why the ftx.smd is causing probs...I think I installed the P3D3 models as a p3D4 add-on correctly. But at least now I have some GA traffic.

Many thanks

Chuck
ChuckOman
 
Posts: 34
Joined: Wed Jul 09, 2014 7:55 pm

Previous

Return to Prepar3D

Who is online

Users browsing this forum: No registered users and 1 guest