voice error NonConnected (1794) disconnect

voice error NonConnected (1794) disconnect

Postby ChuckOman » Sat Aug 18, 2018 2:11 pm

Using Pilot Client v1.06 today with P3D4.3 on two rating flights, I became disconnected from the network when approaching the destinations.
Messages said VOICE ERROR NotConnected (1794).

Wasn't able to reconnect until I amended my callsign (e.g. SKY1672 => SKY1672A).
Unfortunately lost my peaware flight record as a result of new callsign.

Is changing callsign still the correct/only way to reconnect when using the new client ?

Any thoughts what on caused voice error ?

Chuck O
ChuckOman
 
Posts: 37
Joined: Wed Jul 09, 2014 7:55 pm

Re: voice error NonConnected (1794) disconnect

Postby ChuckOman » Wed Aug 22, 2018 7:53 am

Voice disconnect using PilotClient 1.0.6 happened again last night, about 1:40 into KMRY-KMSO trip.
Voice goes quiet; don't get error message in client till I change frequencies to investigate.
Sent console log to support@pilotedge.net.
ChuckOman
 
Posts: 37
Joined: Wed Jul 09, 2014 7:55 pm

Re: voice error NonConnected (1794) disconnect

Postby Keith Smith » Tue Aug 28, 2018 9:03 am

Chuck,

If you disconnect cleanly from the network, you should be able to reconnect right away with the same callsign. If the client is shutdown in a less than graceful manner, you might have a stale connection on the network for 30 seconds or so, after which the server will remove it in 99% of the cases, then you'll be able to use the same callsign again.
Keith Smith
 
Posts: 9289
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ


Return to Prepar3D

Who is online

Users browsing this forum: No registered users and 0 guests