Cant hear myself on 123.45 (Com 1 and 2)

Cant hear myself on 123.45 (Com 1 and 2)

Postby mikedomanski » Thu Feb 13, 2020 3:58 pm

Mac OS X
X Plane 11.41r
Headset is Bose A20 via USB adapter
Honeycomb Yoke, configured and functions properly
Test of headset hears fine, and the microphone works perfectly doing an audio recording using quicktime. Input and output verified works.
Start X Plane
Plugins->connect pilot edge ok
listen to ATIS and ground control ok
using the assigned button for Contact ATC, depressed during a controller is speaking the audio cuts out verifying the PTT function is working
set com 1 and 2 to 123.45
PTT
do not hear myself

in the preferences for pilot edge, dialog box, it only had output (no input)
mikedomanski
 
Posts: 6
Joined: Wed Feb 12, 2020 1:36 pm

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby Keith Smith » Thu Feb 13, 2020 8:44 pm

Moved to X-Plane room.

Can you post a copy of the PilotEdge_out.txt file from the xplane root folder? That will likely help determine whether there has been an issue opening the audio input device. It uses whatever the default recording device is (according to the operating system). I plan to change that eventually to show a device list as people often aren't aware that it uses the operating system defaults.
Keith Smith
 
Posts: 9687
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby mikedomanski » Thu Feb 13, 2020 8:49 pm

Starting up: PilotEdge client, V1.5.3
initVoice with device NULL, returned 0
initial CSL dir = Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Resources:plugins:PilotEdge:VSPro Resources:CSL
CSL dir = /Users/michaeldomanski/Desktop/X-Plane 11/Resources/plugins/PilotEdge/VSPro Resources/CSL
PilotEdge initialized
pttAccumulatedTrigger: unable to open login credentials: No such file or directory [Resources/plugins/PilotEdge/VSPro Resources/VSProConnect.ini]
pttAccumulatedTrigger: unable to open login credentials: No such file or directory [Resources/plugins/PilotEdge/VSPro Resources/VSProConnect.ini]
Entered deferred startup
completed deferred startup
ConnectPrefs: No such file or directory [Resources/plugins/PilotEdge/VSPro Resources/VSProConnect.ini]
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_voltage.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_groundspeed.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com_selector.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com1_frequency.txt
Connecting N13043 with ICAO type: C172
sys ID = C02KH9RKDNC
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 81,82
Checking for traffic relay file...
COM2 is now considered to be off
PTT Trigger, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 37
VSProClient: sent bye
VSProClient: signalled controller entered
MessageController exiting
VSProClient: connection closed
VSProClient: disconnect() complete
PTT Trigger, calling connect
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_voltage.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_groundspeed.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com_selector.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com1_frequency.txt
Connecting N13043 with ICAO type: C172
sys ID = C02KH9RKDNC
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 85,86
Checking for traffic relay file...
COM2 is now considered to be off
receiving ping
sending pong
entered disconnect callback, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 253
VSProClient: sent bye
VSProClient: signalled controller entered
VSProClient: connection closed
MessageController exiting
VSProClient: disconnect() complete
PTT Trigger, calling connect
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_voltage.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_groundspeed.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com_selector.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com1_frequency.txt
Connecting N13043 with ICAO type: C172
sys ID = C02KH9RKDNC
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 87,88
Checking for traffic relay file...
COM2 is now considered to be off
receiving ping
sending pong
receiving ping
sending pong
PTT Trigger, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 38
VSProClient: sent bye
VSProClient: signalled controller entered
MessageController exiting
VSProClient: connection closed
VSProClient: disconnect() complete
PTT Trigger, calling connect
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_voltage.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_groundspeed.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com_selector.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com1_frequency.txt
Connecting N13043 with ICAO type: C172
sys ID = C02KH9RKDNC
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 89,90
Checking for traffic relay file...
COM2 is now considered to be off
PTT Trigger, calling disconnect
VSProClient: disconnect() entered
MessageController::sendMsg entered: msg = QUIT
status = 37
VSProClient: sent bye
VSProClient: signalled controller entered
MessageController exiting
VSProClient: connection closed
VSProClient: disconnect() complete
PTT Trigger, calling connect
Setting up connection details...
Checking for slaves...
Checking for server file...
Checking for voice service file...
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_voltage.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_groundspeed.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com_selector.txt
looking for Mac HD:Users:michaeldomanski:Desktop:X-Plane 11:Aircraft:Laminar Research:Cessna 172SP:PE_com1_frequency.txt
Connecting N13043 with ICAO type: C172
sys ID = C02KH9RKDNC
Connected to PilotEdge Server
Connected to PilotEdge Voice
Sent voice ids to server: 94,95
Checking for traffic relay file...
COM2 is now considered to be off
mikedomanski
 
Posts: 6
Joined: Wed Feb 12, 2020 1:36 pm

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby mikedomanski » Fri Feb 14, 2020 5:59 am

I installed Discord on my mac (the app) and did a successful test of the audio microphone and sound.
mikedomanski
 
Posts: 6
Joined: Wed Feb 12, 2020 1:36 pm

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby mikedomanski » Fri Feb 14, 2020 7:20 am

I saw that com 2 was off. no way to turn it on but by putting X plane in scenery + 2d to actually click the com 2 button to on. then the radio check works. Now - how can i have com 2 start up in the on position?

I added an audio panel to Air Manager my other ipad display so i can actually turn on the com 2, but you need to click it on/off a couple times. its a work around for now until i figure out how to have com 1 and com 2 both on by default.
mikedomanski
 
Posts: 6
Joined: Wed Feb 12, 2020 1:36 pm

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby Keith Smith » Fri Feb 14, 2020 7:49 am

Mike,

The simultaneous use of COM1/2 is just to establish a loopback on the same frequency so you can hear yourself for the purposes of testing the mic. Alternatively, you could just talk to ATC (I thought you had tried that and it was not working). You don't actually need this functionality for normal operations, unless you plan on, say, picking up the ATIS on com2 while listening to ATC on com1.

To answer your specific question, there are xplane commands to toggle the reception of COM1 or COM2 which can be mapped to a button or a key, just like dropping the gear, raising the flaps, etc.
Keith Smith
 
Posts: 9687
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ

Re: Cant hear myself on 123.45 (Com 1 and 2)

Postby mikedomanski » Fri Feb 14, 2020 5:20 pm

Thanks Keith! Im going to start CAT training real soon, now that I have a full working setup. I never knew this level of flight sim existed.
mikedomanski
 
Posts: 6
Joined: Wed Feb 12, 2020 1:36 pm


Return to X-Plane

Who is online

Users browsing this forum: No registered users and 2 guests