I just signed up with PE and trying to do first flight. There’s an optional step to do the radio check. I tuned both radios to 123.45 but cannot hear my radio check. I saw in a post that dual comms not working. Is that the issue here? How can I do the radio check without interfering with ATC?
Newbie - Radio Check
Re: Newbie - Radio Check
Look at your com radio. You only have com1 set to 123.45...in fact, even the text in the box says so. You need 123.45 in both com1 and com2 actives. If you don't have a COM2, choose a plane that has 2 com radios just for the sake of the radio check, then you can switch back to the single com plane later.
P.S. Go Devils
P.S. Go Devils
Kevin
PilotEdge Marketing
Want faster answers to your forum questions? Join our Discord community: www.pilotedge.net/discord
PilotEdge Marketing
Want faster answers to your forum questions? Join our Discord community: www.pilotedge.net/discord
Re: Newbie - Radio Check
Thanks for the reply. Ill give that a try
Re: Newbie - Radio Check
Hi Kevin.
I have resolved this issue. Thanks for the assist.
I have resolved this issue. Thanks for the assist.
Re: Newbie - Radio Check
Just trying to get setup for the 1st time and do a radio check and Com1 on the c172 G530 will not hold my standby freq. It just resets back to the ground freq. the 430 on Com2 works fine.
What do I need to change to get the radio to work correctly?
Thanks,
Will
What do I need to change to get the radio to work correctly?
Thanks,
Will
Re: Newbie - Radio Check
Per the setup instructions and video, you need to turn off your AI Copilot assist (thanks, MSFS2020 -_-). Refer to the page in which you downloaded the Pilot client for more information.wgbiii wrote:Just trying to get setup for the 1st time and do a radio check and Com1 on the c172 G530 will not hold my standby freq. It just resets back to the ground freq. the 430 on Com2 works fine.
What do I need to change to get the radio to work correctly?
Thanks,
Will
Also, check out our discord for more immediate help. Info in my signature below.
Kevin
PilotEdge Marketing
Want faster answers to your forum questions? Join our Discord community: www.pilotedge.net/discord
PilotEdge Marketing
Want faster answers to your forum questions? Join our Discord community: www.pilotedge.net/discord
Re: Newbie - Radio Check
Thanks! Not sure if that part is in the video. I should have finished reading the instructions!!!
Will try again tomorrow.
Will
Will try again tomorrow.
Will
Re: Newbie - Radio Check
Try using the GNS530 MOD it's free and much improved. Infact I'd highly recommend the GTN750 MOD instead since it works with all AC and is touch screen also free. Links below.wgbiii wrote:Just trying to get setup for the 1st time and do a radio check and Com1 on the c172 G530 will not hold my standby freq. It just resets back to the ground freq. the 430 on Com2 works fine.
What do I need to change to get the radio to work correctly?
Thanks,
Will
Dave.
GTN750
https://pms50.com/msfs/
GNS530
https://github.com/pimarc/pms50-gns530