PTT CLIENT ANOMALLY
Posted: Sat Feb 14, 2015 3:22 pm
Keith,
After some serious trouble shooting I would like to put in the Weird Client Issues archives, the following:
Without any changes on my sim ( FSX on Win7 64bit, FSX not running as Administrator and PE installed as Administrator and Run as Administrator as well, the client started to freeze the sim while transmitting. Flying the RealAir Duke V2. In the Transponder/ Transmit Window the green Rx/Tx would stay lit.
This apparently was caused by mapping the Saitek Yoke PTT button via FSUIPC with "Select for FS Control" ,~ PTT Transmit On(SB3,RW,AVC). Which had functioned wonderfully up until last week. I had read a thread that in the Client the Voice Tab Input box mapping to a keyboard input fixed an issue for another pilot. Which I have done. I was going back and forth between FSUIPC trying to get a mapping solution to the yoke (as in the RW). Latest flight while attempting this left me and showing the RX light on in the Transponder box and able to hear all pilots that my controller was communicating with. I was transmitting via the mapped keyboard key. That has never happened either. Is there a solution in the PE client allowing mapping to a button on a yoke outside FSUIPC . Was there a program Called Jokester which was posted somewhere, I recall? As with all HID peripherals There is the potential for issues as in PMDG aircraft like the throttles to be mapped via MSFS using SimConnect as opposed to FSUIPC. Any pointing in the right direction is appreciated.
Regards,
Pat Snyder
After some serious trouble shooting I would like to put in the Weird Client Issues archives, the following:
Without any changes on my sim ( FSX on Win7 64bit, FSX not running as Administrator and PE installed as Administrator and Run as Administrator as well, the client started to freeze the sim while transmitting. Flying the RealAir Duke V2. In the Transponder/ Transmit Window the green Rx/Tx would stay lit.
This apparently was caused by mapping the Saitek Yoke PTT button via FSUIPC with "Select for FS Control" ,~ PTT Transmit On(SB3,RW,AVC). Which had functioned wonderfully up until last week. I had read a thread that in the Client the Voice Tab Input box mapping to a keyboard input fixed an issue for another pilot. Which I have done. I was going back and forth between FSUIPC trying to get a mapping solution to the yoke (as in the RW). Latest flight while attempting this left me and showing the RX light on in the Transponder box and able to hear all pilots that my controller was communicating with. I was transmitting via the mapped keyboard key. That has never happened either. Is there a solution in the PE client allowing mapping to a button on a yoke outside FSUIPC . Was there a program Called Jokester which was posted somewhere, I recall? As with all HID peripherals There is the potential for issues as in PMDG aircraft like the throttles to be mapped via MSFS using SimConnect as opposed to FSUIPC. Any pointing in the right direction is appreciated.
Regards,
Pat Snyder