Page 1 of 1
clicking noise starts going then about 5-10 later, freeze
Posted: Mon Mar 16, 2015 6:42 pm
by golfpilot
This is only happening when using Pilotedge. I start getting a beep sound, the kind where if you were using windows and there is an error. Then I start getting it alot then after about 5-10 minutes of the click/beep noise P3D freezes up. I then have about 30 seconds to a minute were I can talk to the controller. Sometimes it gives me a memory error message. Anybody else have these sudden freezes?
Re: clicking noise starts going then about 5-10 later, freez
Posted: Mon Mar 16, 2015 9:45 pm
by Keith Smith
Are you using a keyboard-based PTT? If so, can you make sure that you're using a non-printable character (such as the LEFT CONTROL key), rather than a printable character (ie, one of the letters of the alphabet or a symbol?)
I do recall seeing a case during testing where a printable character would work as the PTT, but it would fill up the text entry area after long term use. Perhaps that is causing the issue.
Re: clicking noise starts going then about 5-10 later, freez
Posted: Mon Mar 16, 2015 10:00 pm
by golfpilot
I have been using the caps key. I will try the left control key though see if that changes anything
Re: clicking noise starts going then about 5-10 later, freez
Posted: Tue Mar 17, 2015 4:15 am
by trigger_fsx