Page 1 of 2

Teamspeak Server Info

Posted: Mon Oct 24, 2011 7:29 pm
by Denny22
Was wondering if I could get the Teamspeak info to be able to join and fly with friends?

Thanks
Denny

Re: Teamspeak Server Info

Posted: Mon Oct 24, 2011 8:01 pm
by Keith Smith
Denny,

Our teamspeak is used primarily for controller coordination and technical support. We are considering opening it up for PE members, or having an additional server for that purpose. In its current incarnation, though, it's not generally being used by the PE pilot community, you're not missing anything :)

What did you have in mind, specifically?

Re: Teamspeak Server Info

Posted: Mon Oct 24, 2011 8:49 pm
by Denny22
Well just something for pilots wanting to be able to fly together and communicate with out interfering with ATC through PE. Luke and I where going to do a flight together tonight and just wanted a way to be able to communicate with each other. I think there is a private talk button through PE, I'll try that.

Thanks
Denny

Re: Teamspeak Server Info

Posted: Mon Oct 24, 2011 10:20 pm
by Nick Adams
Hey Denny,

Not sure if your into joining VA's, but X - US Airways is a PE supported VA and we have a program for pilots to log hrs while flying on
PE. We do have a minimum requirements to do so, but you can fly any aircraft you have, it doesn't have to be one of our official fleet planes.
We have a teamspeak server available and you may use it for PE communications. There are quite a few pilots who fly on PE while
connected to our server, including me :D

Nick

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 6:01 am
by Keith Smith
Hi Denny,

Understood. I'll see what I can do about getting the TeamSpeak usage policy published in the near future. In the mean time, I'll send the TS3 info to you and you can pass it onto Luke.

Keith

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 10:08 am
by jdzurisin
Real world uses 122.75 for fixed wing and 123.025 for rotors. Any way we can work it into the system limited by distance (long-term wish list of course).

~Jason

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 12:27 pm
by Keith Smith
You can already use these frequencies right now. The radio system works 24/7 and is not dependent on ATC presence.

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 12:32 pm
by jdzurisin
Well there ya go! Problem solved no?

~Jason

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 12:35 pm
by Keith Smith
Jason,

Since we only support one com radio right now (in terms of the PE radio system, independent of the sim's built-in ATIS support), pilots would have to choose between working with ATC and speaking with each other. That's why the TS3 solution might be attractive to pilots. That, and it's a tool that many are familiar with, supports multiple rooms, etc.

Re: Teamspeak Server Info

Posted: Tue Oct 25, 2011 12:39 pm
by jdzurisin
Forgot about the Com radio issue. That is a game changer I suppose.

Although, I think that I will start using the aforementioned freq. while flying uncontrolled with friends as I would in the real world. Should make for some fun.

~Jason