ILS or LOC RW XX

sellener777
Posts: 140
Joined: Wed Apr 23, 2014 12:36 pm
Location: MI USA
Contact:

ILS or LOC RW XX

Post by sellener777 »

Flying some approaches the other night at KLAS and KVGT I was cleared for the "ILS 12L"

The charts name is published as the "ILS or LOC 12L"

I read it back as cleared "ILS or LOC 12L"

I was corrected that i was cleared for the "ILS 12L"


I always thought that the big bold black letters on the plate is the name of the approach independent of what equipment u plan on using.

I did not think a controller could clear you for an approach without using the published name.


It actually happened twice,(being corrected) one at vgt another at las.

AIM 5-4-6d offers a little guidance

just want to make sure i understand what the controller was pointing out.

Thanks,

Erik
Nelson L.
Posts: 351
Joined: Fri Feb 13, 2015 6:18 pm
Location: Pennsylvania

Re: ILS or LOC RW XX

Post by Nelson L. »

I can't give a detailed AIM-quoted reply as Peter probably can (meaning I should probably keep my mouth shut), but its my understanding that the OR portion of the plate means either/or. Cleared for the ILS 12 means that you're cleared for the ILS, not the LOC. If cleared for the ILS, you would presumably have different fixes, minimums, equipment requirements (sometimes...), etc... Key word I think is OR.
X-Plane 10.45
Pilotedge - V3/I11 (N2253F; UAL/CAL 2253; TPX___)
Alphabet Challenge - 2 Legs Completed
Shawn Goldsworthy
Posts: 514
Joined: Sun Nov 07, 2010 9:23 pm
Location: Nova Scotia, Canada

Re: ILS or LOC RW XX

Post by Shawn Goldsworthy »

Nelson is correct. If the approach chart says ILS or LOC 12L, then that same chart covers 2 different approaches (ILS 12L and LOC 12L). There are minimums published for both on the same chart.
Shawn Goldsworthy
PilotEdge ATCS
Image
sellener777
Posts: 140
Joined: Wed Apr 23, 2014 12:36 pm
Location: MI USA
Contact:

Re: ILS or LOC RW XX

Post by sellener777 »

I agree with the last comment completely. There are two approaches. I was surprised to be cleared "ILS 12L" and not by the name of the plate.

Clearance for an ILS approach includes clearance to fly the LOC approach/minimums if present to my understanding.

Why do they publish an ILS XX (with LOC minimums) and then also have an ILS or LOC YY
Peter Grey
Posts: 5716
Joined: Tue Oct 12, 2010 3:21 pm

Re: ILS or LOC RW XX

Post by Peter Grey »

Why do they publish an ILS XX (with LOC minimums) and then also have an ILS or LOC YY
They shouldn't anymore, do you have an example where they do?
Peter Grey
PilotEdge Director of Quality Assurance and Operations
peter@pilotedge.net
stevekirks
Posts: 589
Joined: Wed Oct 01, 2014 6:00 pm
Location: KSGF
Contact:

Re: ILS or LOC RW XX

Post by stevekirks »

Related:

Can we have a subforum called "Stump the Controller Starring Peter Grey"?
Steve Kirks (sKirks on Twitch)
KSGF--I-10 rated
Student Pilot
I invented the Alphabet Challenge, what's your excuse?
Alphabet Challenge
RyanK
Posts: 148
Joined: Mon Dec 22, 2014 11:00 am
Location: Stevens Point, WI

Re: ILS or LOC RW XX

Post by RyanK »

My understanding is that ILS approaches are being renamed "ILS or LOC" and you can be cleared for one or the other. The old phraseology was "Cleared ILS 36 approach, glideslope unusable."
RyanK
Posts: 148
Joined: Mon Dec 22, 2014 11:00 am
Location: Stevens Point, WI

Re: ILS or LOC RW XX

Post by RyanK »

stevekirks wrote:Related:

Can we have a subforum called "Stump the Controller Starring Peter Grey"?
Will there be non-aviation questions? Otherwise that might be an unwinnable game.
sellener777
Posts: 140
Joined: Wed Apr 23, 2014 12:36 pm
Location: MI USA
Contact:

Re: ILS or LOC RW XX

Post by sellener777 »

Ok, it makes sense they phased out (i cant find an example ) the ILS YY and now they are ILS or LOC YY

But still unclear on current phraseology for those then.

When i get an approach clearance i have been used to hearing the name of the plate in the clearance.

So when i an lookng at the ILS or LOC YY and only hear ILS YY in clearance, i get confused.


Plate reads: ILS or LOC YY
Clearance comes: Cleared ILS YY

If I want to fly the LOC approach, I have to ask for it? And atc has to cancel the ils clearance???

Seems silly

After getting a ILS approach clerance (at least in the past)i am used to deciding if i want to fly the gs or fly loc mins without futher atc interaction.
Peter Grey
Posts: 5716
Joined: Tue Oct 12, 2010 3:21 pm

Re: ILS or LOC RW XX

Post by Peter Grey »

Now that I'm in the AIM to answer this one I'll start with the official AIM section that allows for ATC to use 1 name vs the other:
The name of an instrument approach, as
published, is used to identify the approach, even
though a component of the approach aid, such as the
glideslope on an Instrument Landing System, is
inoperative or unreliable. The controller will use the
name of the approach as published, but must advise
the aircraft at the time an approach clearance is issued
that the inoperative or unreliable approach aid
component is unusable, except when the title of the
published approach procedures otherwise allows; for
example, ILS Rwy 05 or LOC Rwy 05.
That's AIM 5-4-6 d (and also AIM 5-4-7 d).

Now onto the question at hand.
So when i an lookng at the ILS or LOC YY and only hear ILS YY in clearance, i get confused.


Plate reads: ILS or LOC YY
Clearance comes: Cleared ILS YY

If I want to fly the LOC approach, I have to ask for it? And atc has to cancel the ils clearance???
First to limit the scope of the question AIM 1-2-3 specifically allows substitution in the case of VOR/NDB OR GPS type approaches. So this hypothetical only applies to ILS OR LOC approaches.

That AIM section (1-2-3) only deals with GPS and isn't relevant to this question.

And the AIM has nothing on the ILS or LOC question in terms of how you fly the approach.

A search through the instrument procedures handbook shows nothing on it as well, same with the ATC manual, or any other reference I looked through.

So with nothing saying you can sub in a LOC for an ILS I have to conclude that you are correct in saying that an amended clearance is needed in this case. Honestly though if you are planning to do the LOC approach ahead of time, just let ATC know and we will accommodate.
Peter Grey
PilotEdge Director of Quality Assurance and Operations
peter@pilotedge.net
Post Reply