[Jul 17] Adding SFO to coverage area

Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Anthony Santanastaso wrote:
Kim Ellis wrote:No audio recordings for 16th and 17th :( and the 17th was so good when American Airlines 211 Heavy heading south out KSFO, Australian 081 Heavy heading north to KSFO, and a controller, met around 30,000' at a closing speed of around 900+ kts, approx 1,000' vertical separation and a few clicks horizontal, for a chat and a cuppa, and had visual for 30 seconds or so. It doesn't get much better. But no audio :( Someone doesn't like me.
Kim, I remember you saying that you had some video of the flight. Do you have a screenshot or video to post?

(P.S. Watch out for the "dragons!")
The video is only about 30 seconds (FRAPS is the straw on this sim) but it's a dragon for sure. I'll tidy it up. Where would you like it delivered? Were you the controller? If so, well manipulated :) Always very hard to get two planes close at speed and altitude.
Anthony Santanastaso
Posts: 541
Joined: Fri Feb 08, 2013 10:29 am
Location: Long Island, NY (KFRG)

Re: [Jul 17] Adding SFO to coverage area

Post by Anthony Santanastaso »

Kim Ellis wrote:The video is only about 30 seconds (FRAPS is the straw on this sim) but it's a dragon for sure. I'll tidy it up. Where would you like it delivered? Were you the controller? If so, well manipulated :) Always very hard to get two planes close at speed and altitude.
Yes, I was. It just so happened that the two of you flew in exact opposite directions at appropriate DRVSM altitudes. Can you post a link to the short video here?
Anthony Santanastaso
PilotEdge ATCS
Private Pilot ASEL
Twitch broadcasts: Archived | Live
Image
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Anthony Santanastaso wrote:
Kim Ellis wrote:The video is only about 30 seconds (FRAPS is the straw on this sim) but it's a dragon for sure. I'll tidy it up. Where would you like it delivered? Were you the controller? If so, well manipulated :) Always very hard to get two planes close at speed and altitude.
Yes, I was. It just so happened that the two of you flew in exact opposite directions at appropriate DRVSM altitudes. Can you post a link to the short video here?
Will do it tonight (my time AEST) and advise.
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Kim Ellis wrote:
Anthony Santanastaso wrote:
Kim Ellis wrote:The video is only about 30 seconds (FRAPS is the straw on this sim) but it's a dragon for sure. I'll tidy it up. Where would you like it delivered? Were you the controller? If so, well manipulated :) Always very hard to get two planes close at speed and altitude.
Yes, I was. It just so happened that the two of you flew in exact opposite directions at appropriate DRVSM altitudes. Can you post a link to the short video here?
Will do it tonight (my time AEST) and advise.
Tried twice guys. One FRAPS avi block 1.5 GB. With my Internet connection in slow mode, it ain't gonna happen in this lifetime. Looks like after the 25th when my link goes back to usable. Oh the joys of living in the bush. Sorry.
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

OK, I had to render it to wmv (not as crisp as the raw avi), cut it down to nothing, and pump like hell to get it down the line. You guys just don't know how lucky you are having good internet. My voice is missing, misconfigured FRAPS I think. Enjoy the dragons meeting :)
bruce
Posts: 193
Joined: Sat Sep 22, 2012 3:45 am
Location: UK

Re: [Jul 17] Adding SFO to coverage area

Post by bruce »

Can I make it in my trusty Legacy?
Hell yes --- why should Kim have all the fun lol
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Kim Ellis wrote:OK, I had to render it to wmv (not as crisp as the raw avi), cut it down to nothing, and pump like hell to get it down the line. You guys just don't know how lucky you are having good internet. My voice is missing, misconfigured FRAPS I think. Enjoy the dragons meeting :)
OK, I uploaded the movie file with my previous message, but I can't see it.Can anyone else see it, and if not why not, the system said everything went well.

regards,
Kim
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

The dragons ate my attached file, so here is a small file to see if that works.
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Kim Ellis wrote:The dragons ate my attached file, so here is a small file to see if that works.
It got eaten too, so uploading to my website and will post the link here.
Kim Ellis
Posts: 125
Joined: Tue Oct 04, 2011 10:47 am
Location: Mengyuan, Moolboolaman, Qld, Australia
Contact:

Re: [Jul 17] Adding SFO to coverage area

Post by Kim Ellis »

Kim Ellis wrote:
Kim Ellis wrote:The dragons ate my attached file, so here is a small file to see if that works.
It got eaten too, so uploading to my website and will post the link here.
Here is the link http://mengyuan.com.au/images/AA211H.wmv. It's short. Controller and other pilot prattling away. Me looking for the traffic. You can't hear me because my FRAPS was mis-configured. Just when I was about to give up I caught AA211H out of the corner of my eye. Next time we'll close more directly :)
Post Reply