CTAF frequencies on PE

Post Reply
Nuno Santos
Posts: 28
Joined: Fri Apr 18, 2014 7:25 pm

CTAF frequencies on PE

Post by Nuno Santos »

Hi guys,

I would like to know what is the correct procedure on PE for announcing intentions on non-towered airports. I always use the CTAF frequency displayed on the airport charts but looking at the audio recordings I guess most people use 122.800 and not many are using the real-world frequencies. :?:
Top
Keith Smith
Posts: 9942
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:
Contact Keith Smith

Re: CTAF frequencies on PE

Post by Keith Smith »

not all the CTAF's are recorded. Only 122.70 and 122.80. You should used the published CTAF, as you are doing now.
Top
Nuno Santos
Posts: 28
Joined: Fri Apr 18, 2014 7:25 pm

Re: CTAF frequencies on PE

Post by Nuno Santos »

Thanks Keith. Another question: what is those Memphis ARTCC recordings?
Top
Keith Smith
Posts: 9942
Joined: Sat Oct 09, 2010 8:38 pm
Location: Pompton Plains, NJ
Contact:
Contact Keith Smith

Re: CTAF frequencies on PE

Post by Keith Smith »

Those are for a specific commercial client. The public coverage area remains the same. We just happen to provide limited service for one particular client in Memphis now.

We don't offer the service to everyone because we are not configured to provide full service up to Memphis center...only local training operations at Memphis. The customer is ProFlight (http://proflight.aero) if you want to check them out.
Top
Post Reply

Return to “Pilots”